Used engine oil, heavy fuel, bunker fuel,oil sludge,lubricant oil
can be regenerated diesel oil,and the waste animal, vegetable oil,
acid oil, drainage oil also can be convert to biodiesel oil. these
available by-products can be converted as fuel oil directly,which
is from the refinery, chemical plant, chemical fertilizer plant,
urea plant, coking plant, such as: alcohols, sulfonated oil,
naphtha, paraffin wax, benzene, naphthalene, ketones. If we deal
these used oil and by-products by burning or burying, it is not
only bring serious environmental pollution, also caused a huge
waste of energy. So on the basis of reusing resources or
environmental protection, or view the point of being able to bring
enormous economic benefits for the producers, the waste oil for
recycling has a very good prospects.
The main feature
1)main components:spray gun,combustor/combustion
chamber/burner,reactor,waste oil pump,gas manifold,sludge
tank,condenser,oil tank,water seal/water block/hydroseal,induced
draft fan/exhaust fan,dust removal chamber,chimney,electric control
2) Combustor will provide heat energy for the entire process. Under
the action of heat energy, the material will be cracked and
generated a lot of oil vapor, which will be discharged into gas-oil
separator and then passed into oil through condensers.Those
incondensable gas will be filtered through water seal and last
torched.what’s more ,we’ll handle the black smoke produced during
processing in the dust removal chamber.
the main technical characteristics
1.The key parts of the equipment, cracking processor,which adopts a
horizontal rotating structure. This structure have those advantages
compared with the old ones. The fuel for new style fuel is fuel
oil, and the residue generated during the fuel burning can be lived
up to the world exhaust emission standards. Therefore, this fuel
oil can be used in any country.
2. The heating method for the new style equipment is indirect
heating. The advantages of this methods are as follows:
1) When a system problem occurs, turn off all the exhaust fans, you
can instantly cut off the heating source to ensure system’s
2) The heat exchange distance is 5-7 times more than old equipment,
higher thermal efficiency.
3) Greatly extend the life span of the main parts in the
equipment,which is 2-3 times than the old equipment.
3.using simple chemical method to solve the product’s color and
4. the output oil is not less than 90%.
5. the appearance of the device: Elegant, economical and practical.
6. the catalytic pyrolysis process and chemical extraction
7. more perfect environmental protection parts, such as waste gas
burner and flue dust chamber.
8. reasonable design, advanced manufacturing technology, high
degree automation, perfect security facilities.